simple email setup

categories: config, debian

I was unable to find a good place that describes how to create a simple self-hosted email setup. The most surprising discovery was, how much already works after:

apt-get install postfix dovecot-imapd

Right after having finished the installation I was able to receive email (but only in in /var/mail in mbox format) and send email (bot not from any other host). So while I expected a pretty complex setup, it turned out to boil down to just adjusting some configuration parameters.

Postfix

The two interesting files to configure postfix are /etc/postfix/main.cf and /etc/postfix/master.cf. A commented version of the former exists in /usr/share/postfix/main.cf.dist. Alternatively, there is the ~600k word strong man page postconf(5). The latter file is documented in master(5).

/etc/postfix/main.cf

I changed the following in my main.cf

@@ -37,3 +37,9 @@
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
+
+home_mailbox = Mail/
+smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination permit_sasl_authenticated
+smtpd_sasl_type = dovecot
+smtpd_sasl_path = private/auth
+smtp_helo_name = my.reverse.dns.name.com

At this point, also make sure that the parameters smtpd_tls_cert_file and smtpd_tls_key_file point to the right certificate and private key file. So either change these values or replace the content of /etc/ssl/certs/ssl-cert-snakeoil.pem and /etc/ssl/private/ssl-cert-snakeoil.key.

The home_mailbox parameter sets the default path for incoming mail. Since there is no leading slash, this puts mail into $HOME/Mail for each user. The trailing slash is important as it specifies ``qmail-style delivery'' which means maildir.

The default of the smtpd_recipient_restrictions parameter is permit_mynetworks reject_unauth_destination so this just adds the permit_sasl_authenticated option. This is necessary to allow users to send email when they successfully verified their login through dovecot. The dovecot login verification is activated through the smtpd_sasl_type and smtpd_sasl_path parameters.

I found it necessary to set the smtp_helo_name parameter to the reverse DNS of my server. This was necessary because many other email servers would only accept email from a server with a valid reverse DNS entry. My hosting provider charges USD 7.50 per month to change the default reverse DNS name, so the easy solution is, to instead just adjust the name announced in the SMTP helo.

/etc/postfix/master.cf

The file master.cf is used to enable the submission service. The following diff just removes the comment character from the appropriate section.

@@ -13,12 +13,12 @@
#smtpd pass - - - - - smtpd
#dnsblog unix - - - - 0 dnsblog
#tlsproxy unix - - - - 0 tlsproxy
-#submission inet n - - - - smtpd
-# -o syslog_name=postfix/submission
-# -o smtpd_tls_security_level=encrypt
-# -o smtpd_sasl_auth_enable=yes
-# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
-# -o milter_macro_daemon_name=ORIGINATING
+submission inet n - - - - smtpd
+ -o syslog_name=postfix/submission
+ -o smtpd_tls_security_level=encrypt
+ -o smtpd_sasl_auth_enable=yes
+ -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+ -o milter_macro_daemon_name=ORIGINATING
#smtps inet n - - - - smtpd
# -o syslog_name=postfix/smtps
# -o smtpd_tls_wrappermode=yes

Dovecot

Since above configuration changes made postfix store email in a different location and format than the default, dovecot has to be informed about these changes as well. This is done in /etc/dovecot/conf.d/10-mail.conf. The second configuration change enables postfix to authenticate users through dovecot in /etc/dovecot/conf.d/10-master.conf. For SSL one should look into /etc/dovecot/conf.d/10-ssl.conf and either adapt the parameters ssl_cert and ssl_key or store the correct certificate and private key in /etc/dovecot/dovecot.pem and /etc/dovecot/private/dovecot.pem, respectively.

The dovecot-core package (which dovecot-imapd depends on) ships tons of documentation. The file /usr/share/doc/dovecot-core/dovecot/documentation.txt.gz gives an overview of what resources are available. The path /usr/share/doc/dovecot-core/dovecot/wiki contains a snapshot of the dovecot wiki at http://wiki2.dovecot.org/. The example configurations seem to be the same files as in /etc/ which are already well commented.

/etc/dovecot/conf.d/10-mail.conf

The following diff changes the default email location in /var/mail to a maildir in ~/Mail as configured for postfix above.

@@ -27,7 +27,7 @@
#
# <doc/wiki/MailLocation.txt>
#
-mail_location = mbox:~/mail:INBOX=/var/mail/%u
+mail_location = maildir:~/Mail

# If you need to set multiple mailbox locations or want to change default
# namespace settings, you can do it by defining namespace sections.

/etc/dovecot/conf.d/10-master.conf

And this enables the authentication socket for postfix:

@@ -93,9 +93,11 @@
}

# Postfix smtp-auth
- #unix_listener /var/spool/postfix/private/auth {
- # mode = 0666
- #}
+ unix_listener /var/spool/postfix/private/auth {
+ mode = 0660
+ user = postfix
+ group = postfix
+ }

# Auth process is run as this user.
#user = $default_internal_user

Aliases

Now Email will automatically put into the '~/Mail' directory of the receiver. So a user has to be created for whom one wants to receive mail...

$ adduser josch

...and any aliases for it to be configured in /etc/aliases.

@@ -1,2 +1,4 @@
-# See man 5 aliases for format
-postmaster: root
+root: josch
+postmaster: josch
+hostmaster: josch
+webmaster: josch

After editing /etc/aliases, the command

$ newaliases

has to be run. More can be read in the aliases(5) man page.

Finishing up

Everything is done and now postfix and dovecot have to be informed about the changes. There are many ways to do that. Either restart the services, reboot or just do:

$ postfix reload
$ doveadm reload

SPF

$ apt-get install postfix-policyd-spf-python

/etc/postfix/main.cf

policy-spf_time_limit = 3600s

/etc/postfix/master.cf

policy-spf unix - n n - - spawn user=nobody argv=/usr/bin/policyd-spf

DNS TXT record with value:

v=spf1 ip4:62.75.219.19 -all

/etc/postfix-policyd-spf-python/policyd-spf.conf

debugLevel = 1 
defaultSeedOnly = 1

HELO_reject = SPF_Not_Pass
Mail_From_reject = Fail

PermError_reject = False
TempError_Defer = False

skip_addresses = 127.0.0.0/8,::ffff:127.0.0.0//104,::1//128

FIXME: the skip_addresses field should also list all hosts that I get email forwarded from. For example if I get my josch@debian.org email forwarded to this server, then I should list the debian.org mail relay servers. A list of these can be found by doing:

ldapsearch -x -LLL -b dc=debian,dc=org -h db.debian.org 'purpose=mail relay' ipHostNumber

Otherwise, senders with an SPF record with only their own IP and a final -all will see their mail rejected by the server. This is because the email was forwarded by the debian.org relay but that IP was not in their SPF record.

DKIM

$ apt-get install opendkim opendkim-tools
$ mkdir /etc/mail
$ cd /etc/mail
$ opendkim-genkey -t -s mail -d mister-muffin.de
$ cat mail.txt

/etc/opendkim.conf

Domain mister-muffin.de KeyFile /etc/mail/mail.private Selector mail Canonicalization relaxed/relaxed

/etc/default/opendkim

SOCKET="inet:8891@localhost"

/etc/postfix/main.cf

milter_default_action = accept milter_protocol = 2 smtpd_milters = inet:localhost:8891 non_smtpd_milters = inet:localhost:8891

$ service opendkim restart
$ service postfix restart
View Comments

automatically suspending cpu hungry applications

categories: config

TLDR: Using the awesome window manager: how to automatically send SIGSTOP and SIGCONT to application windows when they get unfocused or focused, respectively, to let the application not waste CPU cycles when not in use.

I don't require any fancy looking GUI, so my desktop runs no full-blown desktop environment like Gnome or KDE but instead only awesome as a light-weight window manager. Usually, the only application windows I have open are rxvt-unicode as my terminal emulator and firefox/iceweasel with the pentadactyl extension as my browser. Thus, I would expect that CPU usage of my idle system would be pretty much zero but instead firefox decides to constantly eat 10-15%. Probably to update some GIF animations or JavaScript (or nowadays even HTML5 video animations). But I don't need it to do that when I'm not currently looking at my browser window. Disabling all JavaScript is no option because some websites that I need for uni or work are just completely broken without JavaScript, so I have to enable it for those websites.

Solution: send SIGSTOP when my firefox window looses focus and send SIGCONT once it gains focus again.

The following addition to my /etc/xdg/awesome/rc.lua does the trick:

local capi = { timer = timer }
client.add_signal("focus", function(c)
if c.class == "Iceweasel" then
awful.util.spawn("kill -CONT " .. c.pid)
end
end)
client.add_signal("unfocus", function(c)
if c.class == "Iceweasel" then
local timer_stop = capi.timer { timeout = 10 }
local send_sigstop = function ()
timer_stop:stop()
if client.focus.pid ~= c.pid then
awful.util.spawn("kill -STOP " .. c.pid)
end
end
timer_stop:add_signal("timeout", send_sigstop)
timer_stop:start()
end
end)

Since I'm running Debian, the class is "Iceweasel" and not "Firefox". When the window gains focus, a SIGCONT is sent immediately. I'm executing kill because I don't know how to send UNIX signals from lua directly.

When the window looses focus, then the SIGSTOP signal is only sent after a 10 second timeout. This is done for several reasons:

  • I don't want firefox to stop in cases where I'm just quickly switching back and forth between it and other application windows
  • When firefox starts, it doesn't have a window for a short time. So without a timeout, the process would start but immediately get stopped as there is no window to have a focus.
  • when using the X paste buffer, then the application behind the source window must not be stopped when pasting content from it. I assume that I will not spend more than 10 seconds between marking a string in firefox and pasting it into another window

With this change, when I now open htop, the process consuming most CPU resources is htop itself. Success!

Another cool advantage is, that firefox can now be moved completely into swap space in case I run otherwise memory hungry applications without ever requiring any memory from swap until I really use it again.

I haven't encountered any disadvantages of this setup yet. If 10 seconds prove to be too short to copy and paste I can easily extend this delay. Even clicking on links in my terminal works flawlessly - the new tab will just only load once firefox gets focused again.

EDIT: thanks to Helmut Grohne for suggesting to compare the pid instead of the raw client instance to prevent misbehaviour when firefox opens additional windows like the preferences dialog.

View Comments

mplayer config

categories: config

There are dozens of vim configs but not many for mplayer but the defaults dont work that well on some media so here is how I like my mplayer:

 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
stop-xscreensaver=1
vo=xv
ontop=yes
lavdopts=fast=1:threads=2:skiploopfilter=all
autosync=30
framedrop=yes
cache=102400
cache-min=20
cache-seek-min=20
softvol=1
softvol-max=1000
idx=1
ass=yes
embeddedfonts=yes
vfm=libmpeg2 # to selecgt mpeg12 over ffmpeg2
#ao=alsa:device=hw=0.3
#af=pan=2:1:0:0:1:1:0:0:1:0.5:0.5:1:1

Line 1 to 3 are self explanatory. Lines 4 to 6 add some options that slightly improve playback performance. Line 7 to 9 add some ridiculously high caches for playback performance as well.

The softvol entries of lines 10, 11 are sometimes necessary when audio is very silent and you have to make it louder than 100%.

Line 12 rebuilds the index for broken files automatically to be able to seek in files that are either broken or not yet fully downloaded.

Lines 13,14 add support for styled subtitles which are more and more used to subtitle anime and those subtitles are incredible.

Line 15 will probably be removed once an ffmpeg2 bug in decoding mpeg1/2 content is fixed. On some content it creates horrible artifacts and it took me some time to find out that the decoder is broken and i have to force usage of the mpeg12 decoder.

The last two lines are commented out as i only use them seldomly cases and they would otherwise hinder playback. They select my hdmi audio device for output (in cases where my laptop is connected to a hdmi device) and make 5.1 sound play back correctly, mixing it down to stereo.

View Comments